Eneo PNR-5216, Operating Instructions Manual, Page: 12 / 160

User’s Manual
4
Remote Upgrade
You can upgrade the NVR system remotely by using the installation file of the software version to upgrade
if an update service is running.
Update Service Setup
1.
Run the
Service Manager
program in the NVR
system. Refer to
‎3.1 Service Manager
(p. 19)
for details about running the Service Manager
program. Select the Administration Service in
the service list.
2.
Click Option menu and select Update Package and then
select
Update Service
tab. Check the
Use
box and enter
the IP address and port number of the update server.
Update Service Installation
1.
Insert the software CD in the update server.
2. Run the UpdateServiceSetup.exe file in the Setup folder of the software CD.
NOTE: The User Account Control window might appear when using the Microsoft
®
Windows
®
Vista or later
operating system. Click Allow and install the software following the instructions.
3.
Select the language in which to run the program and then click OK .
NOTE:
To properly display the selected language, your PC’s operating system should be set to support
the selected language.
NOTE: To change the
iNEX program’s language after the software has been installed, select
Language
Selector in the iNEX
→
Utility folder of the Start menu before running the iNEX Setup program.
4. When the following screen appears, click Next .