Eneo PNR-5216, Operating Instructions Manual, Page: 32 / 160

User’s Manual
24
3.2 Setup
Log in to the NVR system. Refer to
‎2.1 Connecting, Login
(p. 9) for details about the login. Go to the
System
Menu → Click
iNEX Setup
→ Run the
iNEX Setup
program.

Service
: Allows you to register and manage services and storage. Refer to
Service
(p. 24) for details.

Device : Allows you to register and manage sites. Refer to Device (p. 25) for details.

User : Allows you to register and manage users or user groups. Refer to User (p. 27) for details.

Recording Schedule : Allows you to set up recording schedules. Refer to Recording Schedule (p. 27)
for details.

Event Management : Allows you to set up event management schedules. Refer to Event Management
(p. 28) for details.

(System Setup): Sets up the NVR system. Refer to 2.2 System Setting (p. 10) for details.
NOTE: An alert message is displayed at the bottom of the iNEX Setup screen in the following cases:
– No storage is allocated to a recording service.
– Storage for recording is full.
Service
The Service menu allows you to register and manage services and storage.