4
C. Select „Camera” on the Device menu. Unit ID should be up to 99. Unit ID is not allowed number „0”.
D. Set „PTZ Device” and „ID” of the dome camera. Select RS3/RS485 after PTZ is installed, and then set-up as below table.
4. After setting Unit ID, Camera, and RS-3/RS-485, installing dome camera is basically completed. Please refer to the manual of DVR for the other
installation.
5. Press the related number of the controller which is correspondent to unit ID of DVR. Then press DVR button and adjust unit ID of the controller
6. Make sure if any change is appeared on screen when you press button of the controller for basic testing. If there’s no change appeared, verify cable
connection and setting of installation.
RS-232/RS-485
Baud Rate
Parity
Data
Stop
Usage
RS-3
9600
None
8
Remote Control
RS-485
9600
None
8
PTZ Control
