Eneo KBD-2, Installation And Operating Manual

Page: 19 / 44

9
TIME/DATE
. Display: ON
. Year: 007
3. Month: JUL
4. Day: 0
5. Hour:
6. Minute: 0
Save and Exit
3.3 CAMERA
This camera setup is listed up to 64 cameras and the camera ID has up to 3999.
When the keyboard has that the
Alarm Check option is ON, the camera setup is set automatically after the keyboard checks the camera at the first power on
or after the scan dome function.
At this time, the FE protocol could not be changed.
To add the other camera:
. Select the blank line (- - -) by moving the joystick down or up.
. Twist the handle of the joystick clockwise, then the next camera number displays or press camera number and
CAM key, if that number is not already
defined, the camera number displays.
3. Set the appropriate protocol and port moving the cursor ( <– )by the joystick.
Alarm check option is ON: P-D (PELCO-D), P-P (PELCO-P)
Alarm check option is OFF: F, FE, P-D (PELCO-D), P-P (PELCO-P)
4. Set the appropriate baud rate of the camera.
5. Repeat step -4 to add a new camera.
6. Press
CTRL to save and exit.
7. To change the camera, repeat step -6 after selecting the desired camera number.
Press OFF to delete the saved camera.
Press the
ESC
key to exit without saving.
NOTE: The baud rate of the F2E is according to the value of the set baud rate menu.
When the keyboard has that the alarm check option is OFF, the camera setup displays the blank value after the first power on. At this time, set all cameras
according to the procedure above.
ATTENTION: If a recorder is controlled via the DVR4 protocol, the local dome control is deactivated and cameras may no longer be configured in
this menu setting. The DVR4 protocol is designed to allow the domes to be controlled directly via the RS-485 interface of the recorder,
and not from the KBD-2 keyboard. If one wishes to control the domes via the keyboard, then the DVR2 protocol should be used.
3.4 TIME / DATE
Cam<- PR PT BR
000 FE D 9600
Cam: Camera ID
PR:
Protocol [F,FE,P-D (PELCO-D), P-P (PELCO-P)]
PT: Port [D (DOME), D (DOME)]
BR: Baud rate
Set the KBD controllers’ Time & Date.