3.8 Initialization
Are you sure?
ENTER OR ESC
MAIN MENU
8. Initialization
To initialize the keyboard, select Initialization.
After Initialization, the keyboard returns it to the factory value.
3.9 HOLD TIME
MAIN MENU
9. Hold time: 005s
When the dome ID of the master keyboard is the same as the slave keyboard or the one from AUX IN mode (dome port), during the hold time after the master
keyboard control the dome, the slave keyboard and the unit from the AUX IN mode (dome port) cannot control the dome.
INF (Infinite)
Slave Keyboard user never has the right to control the dome which is selected by master Keyboard users.
~ 00 second
After select hold time, the slave keyboard can control the dome.
When the dome ID of the master keyboard is not the same as the slave keyboard or the one from AUX IN mode (dome port), the hold time has no relation.
Ver x.x Slave
Password: xxxx
<– Current Device ID =
<– Default setting is
9 9 9 9
for administrator,
1 1 1 1
for user
4. Slave Keyboard Setup
Master Keyboard
should be setup as following procedure:
. Check for DIP switch
the 8th of S1 „OFF”
.
. Press
CTRL + MENU
. Check Slave KBD setting „ON”.
Network Set Slave KBD Slave KBD: ON
Network Set Slave KBD Slave KBD Unit: ON for the desired slave keyboard
Slave Keyboard
need to be setup with the following procedure:
. Check for dip switch
the 8th of S1 „ON”
.
. If you setup all connection correctly and turn on slave keyboard, you should see following screen.
Not connected
<– means that the controller is not connected to master keyboard.
