4
• Change the Application Setting - Alarm - Motion Detection
Please follow the steps below to enable changes in the motion detection function of the alarm through the network
if necessary.
Set the motion detection:
. Click the
Motion Detection
button on the left side of the Alarm to enter the „Motion Detection” page.
. Click and drag the mouse across a targeted zone to draw a red rectangle on the image
(coordinates provided below).
NOTE: You can set more than one targeted zone depending on your requirement.
3. Enables / disables the motion detection function.
5. Set up the signal level.
6. Click the
Submit
button to submit the new setting of the recording.
7. Click the
Home
button to return to the home page.
Description of function keys
The targeted zone:
Click and drag the mouse across the targeted zone to draw a red rectangle on the image.
Detection Range:
The red rectangle’s coordinates
Save:
Click to save the motion detection range.
Motion Detection:
This option enables / disables the motion detection function.
Sensitivity Level:
You can select any one of the given options for the setup signal level or just type in the value of
Customized Threshold.
