Eneo GLD-1401 Installation And Operating Manual Download Page 51

Page: 51 / 92

4.  Move to left/right area.
5.  Recorded video list box. This box allows you to access all recorded video, which are stored in the HDD of the
  connected devices.
6.  Playback function bar

•

Play - Click to a recorded video from the PLAY LIST

•

Stop - Click to stop playing back a recorded video or cease recording

•

Pause - Click to freeze the image

•

Step - Click to view images picture-by-picture

•

Zoom in - Enlarges the displaying image

•

Zoom out - Narrows the displaying image

•

Capture / Print: Provides the image capturing and printing functions

NOTE: To view the alarm lists of a camera which were recorded, please (1) click the

icon (2), the Alarm

List window will appear as shown below, (3) select a camera from the drop-down list, then (4) click

the „Search” button.

Summary of Contents for GLD-1401





























































































Search results

Summary of Contents for GLD-1401

Reviews:

Related manuals for GLD-1401

Brands by name

Popular brands

Eneo GLD-1401, Installation And Operating Manual

Search results

Summary of Contents for GLD-1401

Reviews:

Related manuals for GLD-1401

Brands by name

Popular brands