4
. Place the dome camera under 90 degree vertically.
. Set the right limit by pushing the
Joystick
to the right.
3. Set the left limit by pushing the
Joystick
to the left.
4. Set ENABLE to ON to use
To exchange the right and the left limit, set SWAP to ON.
To apply limits on the auto pan (endless panning), set AUTO PAN to ON.
NOTE: When you use the panning range, we recommend using the flip mode to AUTO. When the flip mode is 90°, 100°, 110° or 120° and you
moves over 90° vertically, the panning range operates in opposite side.
TILT RANGE
When the dome camera is installed near a corner, tilt range can be limited by user.
Enable:
ON / OFF
High Limit:
Set 0.0 ~ 80.0
Low Limit:
Set 0.0 ~ 80.0
4.19 Origin Offset
This feature is useful to align a new dome camera exactly the same as the previously installed dome camera.
Dome camera’s origin set and all data initialize option do not override offset values. Only the default set option in this menu will set the offset value to zero.
This can be used to avoid ceiling obstructions.
Enable:
ON (Use Offset value of Origin) / OFF (Do not use Offset value of Origin)
