Eneo FASTRAX III Instruction Manual Download

Page: 39 / 48

PROTOCOL : Auto(default)

/ F2,F2E / Sensormatic / Pelco-P/D / Vicon / Ernitec /

F2/ Philips / Dynacolor

BAUDRATE :

2400/4800/

9600(default)/

19200/38400 bps

PARITY :

None, Even

3.15 Function Run

This Function Run menu allows you to execute the function when you use a keyboard or a DVR without
the function keys (Preset, Pattern, Tour and scan).

FUNCTION RUN SETUP

(CTRL KEY)

PRESET : ---

PATTERN         : ---
TOUR            : ---
SCAN            : ---

HOME

AUTO PAN
RELAY OUT : ---

EXIT (ESC TO EXIT)

3. Select the desired Function by pushing

Joystick

Up or Down.

4. Select the number by twist the

Joystick

in PRESET,PATTERN,TOUR, and SCAN.

5. Press

CTRL

IRIS Open

to execute.

Note: To execute the function, you should save the function (PRESET, PATTERN, TOUR, and
SCAN) first.

HOME

Select the HOME menu and press

CTRL

key. Then dome camera goes to the default position to which

the dome camera returns after an assigned period of inactivity passes.
The default position may be a Preset, Tour, Pattern or no action.

AUTO PAN

You can execute the endless auto pan which is to turn one direction continuously by select the Auto Pan.

-

RELAY OUT

This function can operate only when the relay output setup has the time in the alarm menu.
Ex)

RELAY

OUT

SETUP

OUT1 : ALARM

OUT2 : 1 MIN

OUT3 : ALARM

OUT4 : 5 MIN

EXIT(ESC TO EXIT)

You can select OUT2 or OUT4 and press

CTRL

IRIS Open

then that relay operates during the setting

time only.

Summary of Contents for FASTRAX III

















































Search results

Summary of Contents for FASTRAX III

Reviews:

Related manuals for FASTRAX III

Brands by name

Popular brands

Eneo FASTRAX III, Instruction Manual

Search results

Summary of Contents for FASTRAX III

Reviews:

Related manuals for FASTRAX III

Brands by name

Popular brands