38
SYSTEM SETUP
EVENT / SENSOR - BUZZER OUT
Click on the
BUZZER OUTPUT
menu, and click on a field.
Use the button to modify the value.
This menu will determine the behavior and actions that will trigger the internal buzzer.
Behavior settings
OPERATION
: The internal buzzer can be enabled or disabled.
HDD EVENT
: Determines whether a hard drive event will activate the internal buzzer.
MODE
: Can be set as either
„TRANSPARENT‟ (the buzzer sounds only when the trigger criteria is present)
or
„LATCHED‟ (the buzzer sounds for a set period of time after the trigger).
DURATION
: In
„LATCHED‟ mode, the time that the buzzer will continue to sound after it has been triggered.
Action settings
ALARM
: Determines whether alarm inputs will activate the internal buzzer.
VIDEO LOSS
: Determines whether video loss on any of the selected channels will sound the internal buzzer.
MOTION
: Determines whether motion detection on any of the selected channels will sound the internal buzzer.
NOTE:
Remember to select
„
APPLY
‟
and press
„
ENTER
‟
to
save all settings before exiting these menus.
