36
SYSTEM SETUP
EVENT / SENSOR
From the „
System Setup
‟ menu, click on the
„
EVENT / SENSOR
‟
menu.
EVENT / SENSOR - HDD EVENT
Click on the
„
HDD EVENT
‟
menu, and choose any field.
. Use the button to modify the value.
The DVR will continually monitor the health of the hard drives in the system and detect problems that may be developing.
SMART ALARM:
Enables S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) hard disk monitoring.
CHECK INTERVAL:
Frequency of testing.
DISK FULL EVENT:
Determines whether a
„Disk Full‟ condition would result in a HDD event.
EVENT / SENSOR - ALARM INPUT
Click on the
„
ALARM INPUT
‟
menu, and choose any field.
Use the button to modify the value.
The menu will determine the behavior of each of the 16 alarm inputs.
OPERATION:
Alarm inputs can be enabled or disabled.
TYPE:
Alarm inputs can be set as normally open (N/O) or normally closed (N/C).