Endura FSTL1000 Operator'S Manual Download Page 4

1

www.uniquip.ca

Thank you for your purchase of the Uniquip Endura FSTL1000 Portable

Tower Light. This tower light has been designed and manufactured to our
highest quality demands for durability and performance.

Uniquip Canada Inc. is committed to offering durable products and

quality after-market service. The FSTL1000 Portable Tower Light is warranted
to be free from manufacturer's defects in material and workmanship for a
period of

one (1) year

from the date of shipping as declared on the invoice

from Uniquip Canada. This warranty will be void if the light tower has not
been operated and maintained in the manner prescribed in this Operator's
Manual.

In order for the tower light to perform at its optimum capabilities, the

operator of the unit

must read

this manual

thoroughly before

using this

unit. This Operator's Manual contains important product operation
procedures, and safety precautions.

SAVE THIS MANUAL.

Please keep

this manual nearby when operating the tower light as a reference should any
questions arise.

This tower light is a high voltage electrical device.

DO NOT start

this unit unless it is clear of water or water-filled areas. DO NOT
use this tower light with non-grounded sockets. Use this light
only with GFCI protected circuits. This product is designed for
normal outdoor use.

All jobsites are different. Please ensure that when installing this tower

light in a jobsite, proper precautions have been taken to avoid any accidents,
and to reduce the risk of fire, electric shock or personal injury.

Every care and effort has been made to ascertain the accuracy and

completeness of procedures described in this document to ensure your
enjoyment and satisfaction. If you have any questions or concerns, please
contact the Service Department at Uniquip Canada at 1-800-332-4012.

Pre-Operation Notes

Technical Support Hotline

Ontario,

Western Canada, and USA

T : 1-888-332-4012
F : 1-866-567-0956

Quebec

and Eastern Canada

T : 1-800-332-4012
F : 1-866-825-2221

email your technical questions and comments to:

[email protected]

visit our website:

www.uniquip.ca

2

www.uniquip.ca

1.

READ AND UNDERSTAND OPERATOR'S MANUAL PRIOR TO USE

OF TOWER LIGHT.

2.

THE LIGHTED LAMP IS HOT. DO NOT TOUCH LIGHT FIXTURE,

REFLECTOR OR LENS DURING USE. WAIT FOR AT LEAST 10
MINUTES AFTER SHUT-DOWN TO BE IN CONTACT WITH LAMP.

3. Make certain that the power source conforms to the requirements of your

equipment.

NEVER ALTER THE PLUG.

4.

DO NOT

plug pump into any

NON-GROUNDED

electrical outlet.

5.

DO NOT

attempt to remove ground stem on plug.

6.

USE ONLY

on GFCI protected circuits.

7.

MAKE SURE OPERATOR, CABLE, PLUG AND SOCKET ARE ALL

DRY AND CLEAN. LIQUIDS AND ELECTRICITY DO NOT MIX.
CHEMICALS AND ELECTRICITY DO NOT MIX.

8.

DO NOT

operate where water may accumulate around base.

9.

DO NOT

submerse any portion of the FSTL-1000MH Tower Light in liquid.

10. Keep light

AT LEAST 16' FT AWAY

from pools and spas.

11. Keep light away from any flammable materials.
12.

DO NOT

perform any repairs or maintenance procedures on tower light

unless it has been disconnected from any power source.

13. Use only Endura brand-name parts.
14.

ALL

frayed and/or otherwise damaged cords and components

MUST

be replaced before further use.

15. When using in windy and or other difficult weather conditions, set tower

light up such that the wind is at the back of the fixture and apply the
brake. Support with sand bags if necessary.

16. If light is extended higher than 6' ft,

anchor base to ground

.

17. Always ensure that tires are filled up at proper tire pressure.
18. Always set brake on tower light for transport or when tower light will

be left unattended.

19. Never use any light bulbs larger than what the fixture is rated for.
20.

NEVER LOOK DIRECTLY INTO LIGHTED LAMP.

21.

NEVER OPERATE THE FIXTURE WITHOUT SAFETY LENS

. If safety

lens is broken, replace lens prior to operating fixture.

22. Keep fixture away from children.
23.

DANGER: HIGH VOLTAGE!

24. Provide adequate protection and guarding of all movable parts.

SAVE THESE INSTRUCTIONS.

Safety Precautions

Summary of Contents for FSTL1000



















Reviews: