EndRun Sonoma N12, User Manual

Page: 108 / 174

S o n o m a U s e r M a n u a l 92
C H A P T E R T E N
93 S o n o m a U s e r M a n u a l
O P T I O N S
Software Option Bit Definitions
Bits are numbered from 0 to 31, from right to left. Currently, there are only two software options
defined in the Sonoma. These are for PTP/IEEE-1588 enabled on port 0 (eth0) or port 1 (eth1). The
table below shows the currently defined bits.
Bit 31 Bit 30 ....... Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
PTP
Port 1
(eth1)
PTP
Port 0
(eth0)
CPU Module Options
Standard rear-panel configuration for the CPU Module is the Antenna input, the RS-232 connector
and two ethernet connectors. Refer to Chapter 2 - Basic Installation, Sonoma Physical Description
for more information on the basic Sonoma rear-panel.
In addition to the standard connectors, the CPU Module can be configured with optional outputs.
Some of these optional outputs are a Programmable Pulse Output, a DDS Output, an Alarm Output,
various pulse rates at RS-422 levels, and a second RS-232 serial port with a Serial Time Output. See
sample CPU Module configurations below.
������
�������
�� ������
�������� ���
�� ����
� � ���
���������
�����������������
����
�����������������
����
������
�������
�����
�������� ���
�����
�� ����������
���������
�����������������
����
�����������������
����