EndRun Sonoma N12, User Manual

Page: 101 / 174

S o n o m a U s e r M a n u a l 84
C H A P T E R N I N E
85 S o n o m a U s e r M a n u a l
C O N T R O L A N D S T A T U S C O M M A N D S
Command:
setgpsrefpos
Sonoma reply: Interactive utility is started.
setpwrfltmask (Optional)
See
Chapter 10 - Options, Masking Dual Power Supply Fault Alarms
for information on this com-
mand.
setsigfltmask
This command allows you to enable or mask the Signal Loss Fault. Parameter for this command is
either MASKED or ENABLED. Setting this command to MASKED will prevent a signal loss fault
from creating an alarm condition. Some installations may need to mask this fault when operating the
NTP server as a Stratum 2 server. The factory default setting is ENABLED.
Command:
setsigfltmask MASKED
Sonoma reply:
Signal Loss Fault Mask set to MASKED
sigfltmask
This command displays the current setting for the Signal Loss Fault Mask.
Command:
sigfltmask
Sonoma reply:
Signal Loss Fault is ENABLED
subsysreset
This command performs a GPS Subsystem reset which is similar to cycling the power on the GPS
Subsystem. After about 10 seconds, the boot messages from the GPS Subsystem will be displayed.
Command:
subsysreset
Sonoma reply:
Bootloader 6010-0070-000 v 1.00 - Dec 27 2012 14:48:55
FW 6010-0071-000 v 1.00 - Mar 12 2013 16:08:46
FPGA 6020-0012-000 v 01
syskernel
This command returns the currently booted Linux kernel, either 0 or 1, where 0 is the factory-in-
stalled kernel and 1 is the upgraded kernel.
Command:
syskernel
Sonoma reply:
BOOTED KERNEL IMAGE = 1 (Upgrade)