Status at:
February 2013
ESE 807 / 1107 / 1307 / 1407 DBG (ES) DIN
65
1.
Disassemble the side plate on the operating side of the
generator.
2.
Attach oil drain channel
(Fig. 6-2-(3))
as shown.
3.
Remove oil drain screw
(Fig. 6-2-(2))
so that engine oil runs
off completely.
4.
Screw in the oil drainage screw again. Attach the side
plate again.
5.
Then pour in new oil as already described.
The engine oil has been changed.
WARNING!
The oil escapes immediately after opening the oil drain-
age valve.
The procedure is as described in the operating instructions
for the engine. To do this the side plate on the generator
must be unscrewed and the flap must be opened.
Changing the oil
Change oil filter
Summary of Contents for ESE 1107 DBG DIN
