48
Maintenance
Fig. 8-6 Checking the spark plug
Checking the spark
plug
1. Check the spark plug for damage and clean it using a suitable brush, if it can
be used again.
2. Check the condition and gap of the electrodes, also when using a new spark
plug. Adjust the gap to the correct value if necessary (see Fig. 8-6 Checking
the spark plug).
The spark plug is ready to be installed.
Installing the spark
plug
1. Turn the checked spark plug clockwise
by hand
in the spark plug thread in
the engine Fig. 8-5 . Ensure that the spark plug is inserted without it tilting, so
that the thread is not damaged.
2. Tighten the spark plug using the spark plug wrench supplied.
3. Press the spark plug connector firmly onto the spark plug.
The spark plug has been serviced in an orderly manner.
The generator is ready to use.
Summary of Contents for ECO Power Line ESE 3000 BS
Page 30: ...30 Description of the device NOTES...
Page 56: ...56 Replacement parts NOTES...
Page 57: ...57 Wiring diagram 14 Wiring diagram...
