47
Maintenance
The engine is cooled down sufficiently
A new spark plug is ready to use
One has the re-
quired tool
•
A spark plug wrench (in the scope of delivery)
•
Setting gauge for the electrode gap
Fig. 8-5 Remove spark plug
Remove spark plug
1. Pull the spark plug connector Fig. 8-5 -
of the spark plug. To do this always
pull directly on the plug, never on the ignition cable!
2. Place the spark plug wrench on the spark plug Fig. 8-5 -
and loosen this
by turning anti-clockwise.
The spark plug is removed and must now be assessed.
Summary of Contents for ECO Power Line ESE 3000 BS
Page 30: ...30 Description of the device NOTES...
Page 56: ...56 Replacement parts NOTES...
Page 57: ...57 Wiring diagram 14 Wiring diagram...
