48
The device in-use
Tab. 8-1 Control buttons on the control module
Fig. 8-3 Operating display on the control module
Item
Button
Description
START ENGINE
Press this button to start the power generator if control
mode
is selected (also see
)
SWITCH OFF ENGINE
Press
this button
once
in control mode and
the control module will start the power generator’s cool-down phase, and
it will be switched off afterwards. If this button is pressed for a
2nd time,
then the control module will skip the cool-down phase and the power gen-
erator will be switched off immediately (
NOT RECOMMENDED!
).
RESETTING A FAULT
Press the button to acknowledge an alarm mes-
sage displayed on the screen and to turn off the horn. Inactive alarms are
immediately faded out on the display and the status of the active alarms
changes to “acknowledged" so that this will be faded out immediately af-
ter the cause is eliminated.
RESETTING THE HORN
Press this button to deactivate the horn output
without acknowledging the alarm.
SELECTING A CONTROL MODE
Pressthis button to switch between
the
or
) control modes. The buttons will only be functional if
Fig. 8-4 is displayed in the main window on the control screen. If neces-
sary, you should press the
button repeatedly until the main window is
displayed.
SELECTION SWITCH FOR GENERATOR MODE OR POWER GRID
MODE
Press this button to supply the connected distributor network from the
power generator in control mode,
or the connected distributor net-
work through the public power grid.
MENU SELECTION
This function can only be enabled by service personnel.
ENTER BUTTON
Use this button to confirm or quit editing a setting.
MOVING BETWEEN THE SCREEN PAGES
Press these buttons to move between the different windows displayed on
the screen.
