manualshive.com logo in svg

Endress 333363, Translation Of The Original Operating Manual, Page: 21 / 78

Share
Download
Endress 333363 Translation Of The Original Operating Manual Download Page 21

21

For your safety

WARNING!

Escaping  corrosive  acid  fumes  or  sulphuric  acid  during  and  after  the
charging process. A risk of suffering severe or even deadly burns.

► Only work with acid-resistant protective equipment.
► Clean surfaces covered in acid immediately using adequate amounts of wa-

ter.

► Only charge the starter battery in a well ventilated environment.

CAUTION!

Certain surfaces on the device can get very hot whilst it is running.

Risk of burns
► Never touch any engine parts (in particular the exhaust system) for a few min-

utes after ceasing operation.

► Always leave hot engine parts to cool down before touching them.

CAUTION!

A high device weight. Risk of crushing from improper handling during op-
eration or transport.

► Only lift the generator with the aid of all handles provided or by using a suit-

able hoist.

► During transport on vehicles, ensure that there is the prescribed load secur-

ing in place.

► With it in a raised condition, never come close to or stand under the genera-

tor.

NOTICE!

Leaking  engine  oil  and  operating  fluids  can  contaminate  the  soil  and
groundwater.

► Ensure that the generator is transported horizontally and mounted.
► Make all efforts, at all costs, to prevent escaping of operating fluids.
► Dispose of contaminated soil immediately and according to regulations.

NOTICE!

Use of wrong or outdated fuel damages or destroys the engine.

► Only use the fuel displayed on the sign (Tab. 3-1 ).
► Observe the possibly enclosed documentation for the fuel release of the en-

gine manufacturer

► Observe the shelf life of the fuel according to the supplier.
► Observe the engine operating manual.

Summary of Contents for 333363















































































Reviews:

No comments