Turbimax CUE25 / CUE26
Installation
Hauser
9
3.4
Installation instructions
The Turbimax is supplied with 4 AAA alkaline batteries. You need to install the batteries before you
can use the instrument.
To install the batteries, proceed as follows:
1.
Place the instrument upside down on a soft surface.
2.
Remove the two screws (pos. 1) securing the battery cover (pos. 2). Lift the cover off.
3.
Place the supplied four AAA alkaline batteries (pos. 3) into the battery compartment (pos. 4)
ensuring the correct polarity.
4.
Replace the battery cover and fasten the two screws carefully to ensure a watertight seal.
a0003818
Fig. 5:
Detailed view of the battery compartment
3.5
Post-installation check
Check that the battery cover is correctly placed and fastened to ensure the watertight seal of the
instrument.
1
2
3
4
