Solitrend MMP40
Installation
Hauser
15
2. Once the sensor has been installed and the sensor cable connected, the heat-shrink
tube can be shrunk onto the connector and cable with a hot air blower
A0037428
9
Example of round sensor
3. In addition, the sensor and ground cable can be protected with a silicone tube (not
included in the delivery)
A0037429
10
Example of round sensor
5.7
Post-installation check
Perform the following checks after mounting the device:
Is the device undamaged (visual inspection)?
If provided: are the measuring point number and labeling correct?
Are the connections established correctly and protected against mechanical influences?
Is the device securely seated in the mounting flange (visual inspection)?
Summary of Contents for Solitrend MMP40
Page 35: ......
