Installation
Smart System for Aquacultures SSP200B
14
Hauser
≥
340 (13.4)
≥
150 (5.91)
A0012686
3
Necessary installation clearance in mm (in)
1
3
4
2
A0027798
4
Mounting the mounting plate
1
Wall
2
Boreholes (x 4)
3
Mounting plate
4
Screws
6 mm (not included in the delivery)
A0027799
5
Mounting plate mounted
A0027797
6
Hooking in the device and clicking into place
1. Mount the mounting plates. Observe the installation clearances indicated. The
diameter of the boreholes depends on the wall plugs used. Wall plugs and screws are
not included in the delivery.
2. Hook the device into the holder.
3. Push the device down into the holder until the device clicks into place.
5.2.2
Disassembling the Liquiline CM444 and Modbus Edge Device
Disassemble the Liquiline CM444 transmitter and the Modbus Edge Device in the same
way.
NOTICE
Device is dropped
Damage to the device
‣
When pushing the device out of the holder, secure the device to ensure that you do not
drop it.
‣
Ideally, have two people disassemble the device.
