RIA45
Mounting
Hauser
7
3.3.1
Other standards and guidelines
• IEC 60529:
Degrees of protection provided by enclosures (IP code)
• IEC 61010-1:
Safety requirements for electrical equipment for measurement, control and laboratory use
• EN 60079-11:
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "I" (optional)
3.4
Storage and transport
Please note the following:
The permitted storage temperature is –40 to 85 °C (–40 to 185 °F); it is possible to store the
device at borderline temperatures for a limited period (48 hours maximum).
Pack the device for storage and transportation in such a way that it is reliably protected
against impact and external influences. The original packaging offers the best protection.
Avoid the following environmental influences during storage and transport:
• Direct sunlight
• Vibration
• Aggressive media
4
Mounting
4.1
Installation requirements
NOTICE
High temperatures reduce the life-time of the display.
‣
To avoid heat accumulation, ensure the device is sufficiently cooled.
‣
Do not operate the device in the upper temperature range over a longer period of time.
The process indicator is designed for use in a panel.
The orientation is determined by the legibility of the display. The connections and outputs are
provided on the rear. The cables are connected via coded terminals.
Operating temperature range:
Non-Ex/Ex devices: –20 to 60 °C (–4 to 140 °F)
UL devices: –20 to 50 °C (–4 to 122 °F)
4.2
Dimensions
Observe the installation depth of approx. 150 mm (5.91 in) for the device incl. terminals and
fastening clips.
In the case of devices with an Ex approval, the Ex frame is required and an installation depth
of 175 mm (6.89 in) must be taken into consideration. For more dimensions please refer to
the "Technical data" section in the Operating Instructions.
