background image

RIA45

Operation

Hauser

13

Are the mounted cables strain-relieved?

-

Are the power supply and signal cables correctly connected?

See the wiring diagram on the
housing.

6  

Operation

Thanks to the device's simple operating concept, it is possible to commission the device for

many applications without a printed set of Operating Instructions.
The FieldCare operating software is a quick and convenient way of configuring the device. It

contains brief explanatory (help) texts that provide additional information on individual

parameters.

6.1  

Operating elements

6.1.1  

Local operation at the device

The device is operated by means of the three keys integrated in the front part of the device

• Open the Configuration menu
• Confirm an entry
• Select a parameter or submenu offered in the menu

Within the Configuration menu:
• Scroll step-by-step through the parameters/menu items/characters offered
• Change the value of the selected parameter (increase or decrease)
Outside the Configuration menu:
Display enabled and calculated channels, as well as min. and max. values for all the active channels.

You can always exit menu items / submenus by selecting "x Back" at the end of the menu.
Leave the setup directly without saving the changes by pressing the ‘-’ and ‘+’ keys

simultaneously for longer (> 3 s).

6.1.2  

Configuration via interface & PC configuration software

L

CAUTION

Undefined states and switching of outputs and relays while configuring with the

configuration software

Do not configure the device when the process is running.

To configure the device using the FieldCare Device Setup software, connect the device to your

PC. You need a special interface adapter for this purpose, e.g. the Commubox FXA291.

Summary of Contents for ria45





















Reviews: