Incoming acceptance and product identification
Prosonic M FMU44 HART
8
Hauser
1
2
3
4
5
A0038335
3
T12 housing, electronic insert and connection compartment
1
Housing cover
2
Local display
3
Cable gland
4
Connection compartment
5
Cover for connection compartment
4
Incoming acceptance and product
identification
4.1
Incoming acceptance
Check the following during goods acceptance:
Are the order codes on the delivery note and the product sticker identical?
Are the goods undamaged?
Do the nameplate data match the ordering information on the delivery note?
If necessary (see nameplate), are the Safety Instructions, e. g. XA, provided?
If one of these conditions is not satisfied, contact your Sales Center.
4.2
Product identification
The device can be identified in the following ways:
• Nameplate specifications
• Extended order code with breakdown of the device features on the delivery note
‣
Enter serial number from nameplates in
W@M Device Viewer
)
All of the information on the measuring device and on the scope of the technical
documentation pertaining to the device is displayed.
‣
Enter the serial number from the nameplate in the
Hauser Operations app
or
scan the 2-D matrix code on the nameplate with the camera
All of the information on the measuring device and on the scope of the technical
documentation pertaining to the device is displayed.
4.3
Manufacturer address
Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg, Germany
