Endress+Hauser Proline t-mass B 150, Brief Operating Instructions

Page: 14 / 40

Installation Proline t-mass B 150
14 Hauser
Mounting conditions for mounting boss
90°
90°
D
A0011843
D = 31.0 mm
±
0.05 mm (1.22 in
±
0.02 in)
►
When installing in rectangular ducts with thin walls:
Ã
Use suitable support brackets.
Align the insertion version with the direction of flow.
90° (±3°)
90°(±7°)
A0015746
Check and ensure that the sensor on the pipe/duct is aligned at a 90° angle to the direction of
flow. Rotate the sensor so that the arrow marking on the sensor body corresponds to the direction
of flow. The line marking on the body used to adjust the insertion depth must be aligned with
the direction of flow.
Inlet and outlet runs
For the dimensions and installation lengths of the device, see the Technical Information
document, Mechanical construction section