Installation
Proline Prosonic Flow 93
8
Hauser
3.2
Preparatory steps prior to installation
Depending on the conditions specific to the measuring point (e.g. Clamp-on, number of
traverses, fluid, etc.), a number of preparatory steps have to be taken before actually installing
the sensors:
1.
Using the conditions specific to the measuring point, determine which installation
distances are necessary for installation.
2.
Determine the values for the requisite installation distances.
A number of methods are available for determining the values:
– Local operation of the device
– FieldCare (operating program)
procedure explained in the Operating Instructions on
the CD-ROM
– Applicator (software)
procedure explained in the Operating Instructions on the
CD-ROM
3.
Mechanical preparation of the Clamp-on holders for the sensors:
– Premount the strapping bands: DN 50 to 200 (2 to 8") or DN 250 to 4000 (10 to 160")
– Fix the welded bolts
procedure explained in the Operating Instructions on the
CD-ROM
3.3
Determining the necessary installation distances
The installation distances that are necessary for installation depend on:
• The type of sensor: Prosonic Flow P (DN 50 to 4000 / 2 to 160"),
Prosonic Flow P (DN 15 to 65 / ½ to 2½") or Prosonic Flow W
• Insertion version: Clamp-on with strapping band or welded bolt, installation in pipe
• Number of traverses or single-path/dual-path version
3.3.1
Installation distances for Prosonic Flow P and Prosonic Flow W
(DN 15 to 65 / ½ to 2½")
3.3.2
Installation distances for Prosonic Flow P and Prosonic Flow W
(DN 50 to 4000 / 2 to 160")
DN 15 to 65 (½ to 2½")
Clamp-on (Strapping band)
2 traverses
SENSOR DISTANCE
–
DN 50 to 4000 (2 to 160")
Clamp-on (Strapping band)
Clamp-on (welded bolt)
1 traverse
2 traverses
1 traverse
2 traverses
SENSOR DISTANCE
SENSOR DISTANCE
SENSOR DISTANCE
SENSOR DISTANCE
WIRE LENGTH
POSITION SENSOR
WIRE LENGTH
POSITION SENSOR
