Endress+Hauser Proline Promass 80E, Technical Information

Page: 30 / 50

Proline Promass 80E, 83E
30 Hauser
Process connections in SI units
Flange connections EN (DIN), ASME B16.5, JIS
A0021285
Dimension unit in mm (in)
Flange connections EN (DIN)
di
S
N
G
LK
U
E
L
–
+1.5
2.0
(+0.06)
(–0.08)
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N
1)
/ PN 40: 1.4404/316L
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 3.2 to 12.5 μ m
DN G L N S LK U di
8 95 232/510
2)
4 × Ø14 16 65 17.3 5.35
15 95 279/510 2) 4 × Ø14 16 65 17.3 8.30
25 115 329/600
2)
4 × Ø14 18 85 28.5 12.0
40 150 445 4 × Ø18 18 110 43.1 17.6
50 165 556/715
2)
4 × Ø18 20 125 54.5 26.0
80 200 610/915
2)
8 × Ø18 24 160 82.5 40.5
1) Flange with groove according to EN 1092-1 Form D (DIN 2512N) available
2) Installation length according to NAMUR recommendation NE 132 optionally available
All dimensions in [mm]
Flange according to EN 1092-1 (DIN 2501) / PN 40 (with DN 25-flanges): 1.4404/316L
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 3.2 to 12.5 μ m
DN G L N S LK U di
8 115 329 4 × Ø14 18 85 28.5 5.35
15 115 329 4 × Ø14 18 85 28.5 8.30
All dimensions in [mm]
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N 1) ) / PN 63: 1.4404/316L
Surface roughness (flange): EN 1092-1 Form B2 (DIN 2526 Form E), Ra 0.8 to 3.2 μ m
DN G L N S LK U di
50 180 565 4 × Ø22 26 135 54,5 26,0
80 215 650 8 × Ø22 28 170 81,7 40,5
1)
Flange with groove according to EN 1092-1 Form D (DIN 2512N) available
All dimensions in [mm]