Endress+Hauser Proline Promag W 400 Brief Operating Instructions Download

Page: 12 / 64

Storage and transport

Proline Promag W 400

Hauser

5.2

Transporting the product

5.2.1

For measuring devices ≤ DN 300 (12")

WARNING

Center of gravity of the measuring device is higher than the suspension points of the

webbing slings.

Risk of injury if the measuring device slips.

‣

Secure the measuring device from rotating or slipping.

‣

Observe the weight specified on the packaging (stick-on label).

‣

Observe the transport instructions on the stick-on label on the electronics compartment

cover.

A0015606

• Transport the measuring device to the measuring point in the original packaging.

• Do not remove protective covers or protective caps installed on process connections.

They prevent mechanical damage to the sealing surfaces and contamination in the

measuring tube.

A0015604

5.2.2

For measuring devices ≥ DN 350 (14")

• Lift the measuring device by the flange using the metal brackets.

• If transporting by forklift, do not lift the sensor by the metal casing. This would buckle

the casing and damage the internal magnetic coils.

Summary of Contents for Proline Promag W 400

































































Search results

Summary of Contents for Proline Promag W 400

Reviews:

Related manuals for Proline Promag W 400

Brands by name

Popular brands

Endress+Hauser Proline Promag W 400, Brief Operating Instructions

Search results

Summary of Contents for Proline Promag W 400

Reviews:

Related manuals for Proline Promag W 400

Brands by name

Popular brands