Proline Promag 50D
Hauser
13
Vibrations
Secure the piping and the sensor if vibration is severe.
"
Caution!
If vibrations are too severe, we recommend the sensor and transmitter be mounted separately. Information on
the permitted shock and vibration resistance can be found in the
“Shock and vibration resistance” section in the “Operating conditions: Environment” chapter.
a0010711-en
Measures to prevent vibration of the measuring device
Inlet and outlet run
If possible, install the sensor upstream from fittings such as valves, T-pieces, elbows, etc.
The following inlet and outlet runs must be observed in order to meet accuracy specifications:
• Inlet run
≥
5 x DN
• Outlet run
≥
2 x DN
a0010712
Inlet and outlet run
> 10 m
5 x DN
³
³
2 x DN
