Installation
Loop-powered display unit
12
3. Secure the display unit on the wall with 4 screws.
4. Close the cover and tighten the housing screws.
4.3.3
Mounting the optional HART
®
communication resistance module
Panel housing
The HART
®
communication resistance module is available as an accessory, see section
Accessories in the relevant Operating instructions.
A0020785
4
Mounting the optional HART
®
communication resistance module
1. Unplug the pluggable terminal block.
2. Plug terminal block into the suitable plug-in position on the HART
®
communication resistance module.
3. Plug the HART
®
communication resistance module into the plug-in position on
the housing.
Field housing
The HART
®
communication resistance module is available as an accessory, see section
Accessories in the relevant Operating instructions.
