Loop-powered display unit
Installation
9
See "Technical data" section in the relevant Operating Instructions.
4.3
Installation instructions
For the dimensions of the device, see the "Technical data" section in the relevant
Operating Instructions.
4.3.1
Panel housing
1.
2.
A0017762
1
Installation instructions for the panel housing
Installation in a panel with a panel cutout 92x45 mm (3.62x1.77 in), max. panel
thickness 13 mm (0.51 in).
1. Slot the device into the panel cutout from the front.
2. Fit the mounting clips on the side of the housing and tighten the threaded rods.
4.3.2
Field housing
Pipe mounting (with optional mounting kit)
The device can be mounted on a pipe with a diameter of up to 50.8 mm (2 in) with the
mounting kit (optionally available).
