Tankside Monitor NRF81
Installation
Hauser
17
≤15 Nm (11.06 lbf ")
A0029900
5
Mounting of the Tankside Monitor at a horizontal pipe
5.2
Post-installation check
m
Is the device undamaged (visual inspection)?
m
Does the device conform to the measuring point specifications?
For example:
• Process temperature
• Process pressure (refer to the chapter on "Material load curves" of the "Technical Information"
document)
• Ambient temperature range
• Measuring range
m
Are the measuring point identification and labeling correct (visual inspection)?
m
Is the device adequately protected from precipitation and direct sunlight?
