9
Accessories
The following accessories may be ordered
separately:
•
Transmitter power supply units
– RN 221 power separator (non-Ex)
– RN 221 Z power separator (Ex)
– NX 9120 power supply (1 channel,
non-Ex)
– NX 9121 power supply unit (3 channels,
Ex)
– 1-channel transmitter power supply
units with galvanically separated power
output
Output voltage: typ. 24 V DC ±1 V
Output current: max. 33 mA
Current limiting: 38 mA ±5 mA
•
Hand-held HART
terminal DXR 275
The hand-held terminal communicates with
any HART-compatible unit via the 4 ... 20 mA
line.
Refer to the E+H sales agency in your area
for details and further information on program-
ming (see back cover of these operating in-
structions for addresses).
•
Commuwin II with Commubox
Commuwin II is a graphical, PC based opera-
ting program for intelligent measuring instru-
ments.
Refer to the E+H-System Information
SI 018F/00/en for further information on
Commuwin II. A gratis update of the commu-
win device description is available via internet
http://www.endress.com.
The Commubox serves as the required inter-
face between the HART
interface and the
serial PC interface.
Refer to the E+H sales agency in your area
for further information (see back cover of
these operating instructions for addresses).
•
Extension cable CYK 71
Extension cable for conductive measuring
cells for use with junction box VS.
Order no. 50085333
•
Junction box VS
Junction box with receptacle and 7-pin
connector for extension of measuring
cable connection between measuring cell
and instrument. Protection type: IP 65
Order no. 50001054
LM431CE9.CHP
mypro CLM 431 / CLD 431 conductive
Accessories
Hauser
45
Summary of Contents for mypro CLD 431
Page 2: ......
