Micropilot FMR66B HART
42
V. 1, Rev. 2, 26-07-2022
Hauser
Measuring range restrictions
The following restrictions must be considered when selecting
E
and
F
:
• Minimum distance between reference point
R
and
100%
mark
A
≥ antenna 200 mm (8 in)
Minimum value: 400 mm (16 in)
• Minimum span
F
≥ 400 mm (16 in)
• Maximum value for Empty calibration
E
≤ 30 m (98 ft)
• The linearity check is performed under reference operating conditions.
• The selected values for Empty calibration and Full calibration are only used to create the
linearity protocol. Afterwards, the values are reset to the default values specific for the
antenna. If values other than the default values are required, they must be ordered as a
customized empty/full calibration.
Service
Services that can be selected via the product structure in the Product Configurator include:
• Cleaned of oil+grease (wetted)
• PWIS-free (paint-wetting impairment substances)
• ANSI Safety Red coating, coated housing cover
• Set damping
• Set HART Burst Mode PV
• Set max. alarm current
• Customized empty/full calibration
• Product documentation on paper
A printed (hard copy) version of test reports, declarations and inspection certificates can optionally
be ordered via the
Service
feature,
Product documentation on paper
option. The documents can
be selected via the
Test, certificate, declaration
feature are then provided with the device upon
delivery.
Test, certificate, declaration
All test reports, declarations and inspection certificates are provided electronically in the
Device
Viewer
:
Enter the serial number from the nameplate (
Marking
Measuring point (TAG)
The device can be ordered with a tag name.
Location of tag name
Select in the additional specification:
• Stainless steel wired-on tag plate
• Paper adhesive label
• TAG provided by the customer
• RFID TAG
• RFID TAG + stainless steel wired-on tag plate
• RFID TAG + paper adhesive label
• RFID TAG + TAG provided by the customer
• DIN91406 stainless steel TAG
• DIN91406 stainless steel TAG + NFC TAG
• DIN91406 stainless steel TAG, stainless steel TAG
• DIN91406 stainless steel TAG + NFC, stainless steel TAG
• DIN91406 stainless steel TAG, plate supplied
• DIN91406 stainless steel TAG + NFC, plate supplied
Definition of tag name
Specify in the additional specification:
3 lines with a maximum of 18 characters per line
The specified tag name appears on the selected plate and/or on the RFID TAG.
Presentation in the SmartBlue app
The first 32 characters of the tag name
The tag name can always be changed specifically for the measuring point via Bluetooth.