Micropilot FMR66B HART
38
V. 1, Rev. 2, 26-07-2022
Hauser
System integration
HART
Version 7
Supported operating tools
Smartphone or tablet with Hauser SmartBlue app, DeviceCare from version 1.07.05,
FieldCare, DTM, AMS and PDM
HistoROM data management
When replacing the electronic insert, the stored data is transferred by reconnecting the HistoROM.
The device serial number is saved in the HistoROM. The electronics serial number is saved in the
electronics.
Certificates and approvals
Current certificates and approvals that are available for the product can be selected via the Product
Configurator at
www.endress.com
:
1. Select the product using the filters and search field.
2. Open the product page.
3. Select
Configuration
.
CE mark
The measuring system meets the legal requirements of the applicable EU directives. These are listed
in the corresponding EU Declaration of Conformity together with the standards applied.
The manufacturer confirms successful testing of the device by affixing to it the CE mark.
RoHS
The measuring system meets the substance restrictions of the Directive on the Restriction of the Use
of Certain Hazardous Substances 2011/65/EU (RoHS 2) and the Delegated Directive (EU) 2015/863
(RoHS 3).
RCM marking
The supplied product or measuring system meets the ACMA (Australian Communications and Media
Authority) requirements for network integrity, interoperability, performance characteristics as well
as health and safety regulations. Here, especially the regulatory arrangements for electromagnetic
compatibility are met. The products bear the RCM marking on the nameplate.
A0029561
Ex approvals
Additional safety instructions must be followed for use in hazardous areas. Please refer to the
separate "Safety Instructions" (XA) document included in the delivery. Reference to the applicable XA
can be found on the nameplate.
Explosion-protected smartphones and tablets
If used in hazardous areas, mobile end devices with an Ex approval must be used.
Functional safety
Use for level monitoring (MIN, MAX, range) up to SIL 3 (homogeneous or diverse redundancy),
independently evaluated by TÜV Rheinland in accordance with IEC 61508, refer to the "Functional
Safety Manual" for information.
Pressure equipment with
allowable pressure
≤ 200 bar (2
900 psi)
Pressure instruments with a flange and threaded boss that do not have a pressurized housing do not
fall within the scope of the Pressure Equipment Directive, irrespective of the maximum allowable
pressure.
Reasons:
According to Article 2, point 5 of EU Directive 2014/68/EU, pressure accessories are defined as
"devices with an operational function and having pressure-bearing housings".
