Memosens Wave CAS80E
Installation
Hauser
17
Mounting the flow assembly
A0033056
15
Flow assembly mounted on the spectrometer
1.
Loosen the threaded rings of the flow assembly.
2. Remove both O-rings.
3. Check if the silicone grease provided with the kit is permitted for use in your
application. If it is not permitted for this application, use a grease that suits the
application instead.
Grease the O-rings.
4.
First slide a threaded ring (thread in the direction of the assembly) onto the
spectrometer, followed by an O-ring.
5.
Slide the assembly onto the spectrometer.
6. Fit the second O-ring and the second threaded ring onto the spectrometer.
Summary of Contents for Memosens Wave CAS80E
Page 2: ......
