2.4 Mounting in steel piping
The Magphant is mounted in steel piping using the weld stub supplied.
Two different versions are available, depending on nominal diameter:
Weld stub for DN 25
For DN 25 piping, the weld stub has the appropriate radius to match the diameter.
•
Opening in the piping:
∅
= 23 mm.
•
Place the weld stub on the opening and weld it at right angles to the axis of the
piping.
Weld stub for
≥
DN 40
For
≥
DN 40 piping, the weld stub has a graduated scale to ensure that the stub can
be correctly positioned for mounting.
•
Opening in the piping:
∅
= 30 mm.
•
Insert the weld stub into the opening, with the marking (according to the nominal
diameter) flush against the outer wall of the piping and weld it at right angles to the
axis of the piping. For diameters >DN 300, the DN 300 marking is to be used.
ba
025y
07
Wrench size
27 mm
Welding seam
Fig. 6:
DN 25 weld stub
ba02
5y
1
1
Welding seam
Wrench size
27 mm
Fig. 7:
≥
DN 40 weld stub
Magphant
2. Mounting and Installation
Hauser
9
Summary of Contents for magphant
Page 4: ...Magphant 4 Endress Hauser ...
Page 23: ......
