Endress+Hauser magphant, Operating Manual

Page: 2 / 24

Safety Instructions
The following safety instructions must always be carefully observed!
Correct Usage
•
The Magphant flow monitor may only be used for flow measurement of conductive liquids.
•
The Magphant flow monitor is designed and checked according to the regulations in force
according to EN 61010 (VDE 0411, "Protection Measures for Electronic Measurement,
Control, Regulation and Laboratory Equipment”). A hazardous situation may occur if the
instrument is not used for the purpose it was designed
or is used incorrectly.
Please carefully note the information provided in this
Operating Manual indicated by the pictograms:
•
The manufacturer assumes no liability for damage caused by incorrect use of the instrument.
Personnel for Installation, Start-up and Operation
•
Mounting, electrical installation, start-up and maintenance of the instrument may only be
carried out by trained personnel authorised by the operator of the facility.
Personnel must read and understand this Operating Manual before carrying out its
instructions.
•
The instrument may only be operated by personnel who are authorised and trained by the
operator of the facility. All instructions in this manual are to be observed.
•
With special fluids, including those used for cleaning, E+H will be pleased to supply infor-
mation concerning the chemical resistance properties of wetted parts.
•
Ensure that the measuring system is correctly wired up according to the wiring diagrams.
The flowmeter is to be grounded.
Repairs, Dangerous Chemicals
The following procedures must be carried out before a Magphant is sent to Hauser for
repair:
•
A note must always be enclosed with the instrument, containing a description of the fault,
the application and the chemical and physical properties of the product being measured.
•
Remove all residue which may be present. Pay special attention to the gasket grooves and
crevices where fluid may be present. This is especially important if the fluid is dangerous to
health, e.g. corrosive, carcinogenic, radioactive, etc.
•
No instrument should be returned to us without all dangerous material being removed first
(e.g. in scratches or diffused through plastic).
Incomplete cleaning of the instrument may result in waste disposal or cause harm to personnel
(burns etc.). Any costs arising from this will be charged to the owner of the instrument.
Technical Improvements
The manufacturer reserves the right to modify technical data, to reflect development progress,
without prior notice. Your local E+H Sales Office will supply you with all current information and
any updates to this Operating Manual.
Safety Instructions Magphant
2 Hauser