Endress+Hauser gammapilot FTG 671, Operating Instructions Manual

Page: 13 / 64

2 Installation
This Chapter describes the:
•
Measurement system
•
Installation hints for source container and detector
•
Gammapilot installation in a rack or Monorack housing
•
Transmitter and detector wiring
•
Hardware configuration of the Gammapilot card
•
Technical data of the Gammapilot FTG 671 card.
2.1 Measuring system
Table 2.1 lists the sources and detectors used with the Gammapilot FTG 671 transmitter
together with the appropriate data sheets. In addition, each source container is supplied
with an instruction sheet which describes:
•
How to switch on the radiation
•
How to switch off the radiation
•
How to change the radiation source
These must be read before the measuring system is commissioned. Section 2.2 also
includes a short description of the standard components with hints on correct installation.
Special versions of the source container are always accompanied by their own
documentation.
Source container Technical
Information,
Operating manual Detector Technical
Information,
Operating manual
QG 020/100
QG 2000
TI 264F/00/en
TI 346F/00/en
BA 223F/00/en
Scintillation counter
DG 57 TI 180F/00/en
Geiger-Müller counters
DG 17
DG 27 TI 197F/00/en
Table 2.1:
Source container and detectors
for limit detection by gamma
radiation
Gammapilot FTG 671 Chapter 2: Installation
11