manualshive.com logo in svg

Endress+Hauser Fieldgate SFG500, Operating Instructions Manual, Page: 21 / 52

Share
Download
Endress+Hauser Fieldgate SFG500 Operating Instructions Manual Download Page 21

Fieldgate SFG500

FieldCare

Hauser

19

4.2.5

Scan for devices

1. Select a SFG500 node, right-click on it and select 

Connect

2. Right-click on the connected SFG500 node and select 

Create Network

3. FieldCare scans the PROFIBUS segment to which Fieldgate SFG500 is connected for 

devices

– If any of the devices has a DTM of quality less than "1", the Scanning Result dialog

opens and 

OK

 must be pressed before the devices are added to the network

– If more than one device is found, and the "Connect after scanning" option is selected

in Extras... , the Connect after scanning message below must be acknowledged 

with

 OK. 

All devices found are then added to the network view

– If only one device is found, and the "Connect after scanning" option is selected in

Extras... (default setting), FieldCare adds it to the network view, connects and opens 

the DeviceDTM

4. Repeat Steps 1 to 3 for all other Fieldgates that were found
5. The Device DTMs can be opened and the project stored as described in Chapters 4.1.6 

and 4.1.7 respectively

Summary of Contents for Fieldgate SFG500





















































Reviews:

No comments