Fieldgate SFG500
Commissioning
Hauser
9
3.3
Fieldgate SFGNetwork DTM
When Fieldgate SFG500 is used with FieldCare, it operates exclusively as a pure Access
Point. To this end, a CD is included in the scope of supply which contains the latest
documentation and DTMs. These DTMs must first be installed in FieldCare before FieldCare
SFG500 can be used.
NOTE!
• The procedure described below is
not required for FieldCare Version 2.09.xx or greater
,
as in this case the SFGNetwork DTM is installed as part of the DTM library.
3.3.1
Installing the SFGNetwork DTM
1. Insert the CD ROM supplied with Fieldgate SFG500 into the CD ROM drive
2. In the Setup menu which appears, select the option for the
CommDTM
3. Install the DTM by following the instructions
3.3.2
Update the FieldCare DTM catalog
Before it can be used, the SFGNetwork DTM must be integrated in the FieldCare DTM
Catalog.
NOTE!
• For FieldCare Standard and Professional, administrator rights are required to update the
DTM catalog if these are activated
1. Start FieldCare and, if necessary, log on as administrator
2. In the
Start-Up Screen
dialog, press
Continue
and in the
FieldCare
dialog press
Open
–
An empty Project workspace appears
3. Right-click on the
DTM Catalog
menu and select
Update...
–
The
Update DTM Catalog
dialog appears
– Press
Update
to start the search for new DTMs (make take several minutes)
4. When the search is complete, any new DTM will be shown in the left-hand pane:
– Select the SFGNetwork DTM and press
Move >>
– Press
OK
to close the dialog and register the changes
– You are now ready to start
NOTE!
• If a SFGNetwork DTM was already in the catalog, it is automatically updated and does not
appear as "New" in the left-hand panel