FieldEdge SGC500
Electrical connection
Hauser
15
Is the power supply correct?
Is the polarity of the power supply correct?
6
Electrical connection
6.1
Connection conditions
The following conditions must be met:
• Ensure the cable is de-energized when connecting to the SGC500
• Please follow the connection information in this manual
• Supply voltage 9 to 36 V
DC
• Permitted voltage fluctuation ± 10 %
6.2
Connecting the device
6.2.1
Connecting the supply voltage
NOTICE
Damage to device
‣
Do not open the housing of the FieldEdge SGC500.
1 2 3
5
Power supply at the SGC500, socket for 3-pin connector
1
Supply voltage, negative pole
2
Not used
3
Supply voltage, positive pole
A 3-pin connector for the supply voltage is included in the scope of supply.
Connecting the 3-pin connector for the supply voltage
1. Connect the negative pole of the supply voltage to terminal 1 (–).
Summary of Contents for FieldEdge SGC500
Page 27: ......
