Installation
Dipfit W CLA111
14
Hauser
Mounting
The assembly version F is supplied with a retaining ring for pendulous suspension from the
pendulum frame.
Mounting the assembly:
1.
Put the half-shells (Fig. 12, pos. 4) of the adapter to the desired position of the assembly pipe.
2.
Fix the half-shells with the Phillips screws (Fig. 12 pos. 3).
3.
Screw the stop nuts onto the two knurled thumb screws (Fig. 12, pos. 5).
4.
Screw the knurled thumb screws into the bore holes M8 (Fig. 11, pos. 2).
5.
Fix the knurled thumb screws with the stop nuts.
6.
Hang the assembly into the pillow blocks of the pendulum frame (Fig. 14).
