ZEEnit 700 Q
Safety instructions
7
2
Safety instructions
2.1
General notes
For your own safety and to ensure error-free and safe operation of the ZEEnit 700 Q,
please read this chapter carefully before using the appliance.
Observe all safety notes listed in this short instruction and in the user manual and all
messages and notes displayed by the control and analysis program ASpect LS on the
monitor.
Besides the safety instructions listed in the manuals and the local safety regulations
that apply to the operation of the device, the general applicable regulations regarding
accident prevention, occupational health and safety and environmental protection
have to be observed and complied with.
References to potential dangers do not replace the work protection regulations which
must be observed.
2.2
Safety labeling on the ZEEnit 700 Q
Damaged or missing warnings and information symbols can cause incorrect actions
leading to personal injury or material damage! Labels containing symbols must not be
removed or moistened with methanol! Damaged symbol labels must be replaced with-
out delay!
Observe the warning signs on the device! The following warning signs are displayed on
the ZEEnit 700 Q:
Location
Warnings and notice signs
Lamp chamber
WARNING!
Switch off lamps when door is opened!
Sample chamber of
the graphite tube
furnace
Attention! Warning!
Strong electromagnetic field!
People with pace makers are not permitted in close
range!
Caution! Hot surface!
Caution! Emission of UV radiation!
Danger of short circuit!
Handling with jewels not allowed!
Flame sample
chamber
Caution! Hot surface!
Signs on the front