SPECORD PLUS
Security
7
3
Security
For your own safety and to ensure error-free and safe operation of the device, please
read this chapter carefully before commissioning.
Observe all safety instructions listed in this user manual and all messages and infor-
mation displayed on the monitor by the control and analysis software.
3.1
Safety labeling on the device
Warning and mandatory action labels have been attached to the device and must al-
ways be observed.
Damaged or missing warning and mandatory action labels can cause incorrect ac-
tions leading to personal injury or material damage. The labels must not be removed.
Damaged warning and mandatory action labels must be replaced immediately!
The following warning and mandatory action labels have been attached to the de-
vice:
Warning symbol
Meaning
Comment
Warning against hot
surface
The lamp covers become very hot
when the lamps are switched on.
Switch off the lamps and allow them
to cool down before replacing the
lamps or opening the lamp covers.
Warning against UV ra-
diation
The lamp radiation can cause eye
damage. Do not look into the beam of
the UV lamp directly or indirectly via a
mirror.
Mandatory signs/
information sym-
bols
Meaning
Comment
Disconnect the power
supply before opening
the device cover.
On the power switch/power input: Be-
fore opening the device cover, switch
off the device and disconnect the
mains plug from the mains socket.
Observe the operating
manual
Before starting work, read the operat-
ing manual.
For People's Republic of
China only
The device contains controlled sub-
stances. Analytik Jena GmbH warrants
that these substances will not be re-
leased from the device within the next
25 years provided the device is em-
ployed as intended.
