HS 55 (Batch Mode)
Security
7
2
Security
For your own safety and to ensure error-free and safe operation of the device, please
read this chapter carefully before commissioning.
Observe all safety instructions listed in this user manual and all messages and infor-
mation displayed on the monitor by the control and analysis software.
2.1
Safety labeling on the device
Warning and mandatory action labels have been attached to the device and must al-
ways be observed.
Damaged or missing warning and mandatory action labels can cause incorrect ac-
tions leading to personal injury or material damage. The labels must not be removed.
Damaged warning and mandatory action labels must be replaced immediately!
The following warning and mandatory action labels have been attached to the de-
vice:
Warning symbol
Meaning
Comment
Warning against a haz-
ard location
On the cell heating connection: dan-
gerous electrical voltage warning. Only
connect and disconnect the connec-
tion cable when the device is switched
off.
Warning about hot sur-
face
On the red device hood: there is a risk
of burns on the Hg Plus Upgrade
Modul (optional). Allow the module to
cool down before opening the hood.
"Caution Hot" warn-
ing sign
Warning about hot sur-
face
On the cell heating: risk of burns at
the cell heating. Keep a safety distance
during operation.
Mandatory action
labels/information
symbols
Meaning
Comment
Disconnect the power
plug prior to assembly
or disassembly and
opening of the device.
On the power switch/power input:
Switch off the device and disconnect
the power plug from the power con-
nection prior to assembly or disassem-
bly and opening of the device.
For People's Republic of
China only
The device contains controlled sub-
stances. Analytik Jena GmbH warrants
that these substances will not be re-
leased from the device within the next
25 years provided the device is em-
ployed as intended.