Manual Biometra TSC ThermoShaker, Vers. 01_2019
11
At the end of the program (after the set time elapses) the platform motion stops and the timer
shows the flashing reading STOP accompanied by the repetitive sound signal until the
“Shaker”-Start/Stop button is pressed.
If the working time is not set (or deleted) and the timer indicator in the upper line shows
00:00, pressing the
“Shaker”-Start/Stop button causes the apparatus to operate continuously
until the “Shaker”-Start/Stop button is pressed again.
If required, there is possibility to restart the timer when it is running. Press the
“Timer”-
Start/Stop button once (Fig. 6/5) to stop the timer. Press the
“Timer”-Start/Stop button again
to restart the timer.
The platform motion can be stopped at any time by pressing the
“Shaker”-Start/Stop button.
In this case the program and the platform motion stop, the timer is set back to zero and
switches into the STOP mode. Press the
“Shaker”-Start/Stop” button to repeat the operation
with the same time and speed.
Attention:
At the end of the set time period the platform movement is stopped
automatically, but the heating can be stopped only manually by reducing the
temperature with the “▼“ T(ºC) key (Fig. 6/3 - lower button) till the OFF sign
appears in the upper line of the display.
At the end of operation switch off the unit by using the on-off switch at the rear side of the
TS1 (Fig. 5).