Endorphines GROUND CONTROL, Manual, Page: 8 / 53


Combination of TRACK D/1/2/3 + PLAY during the playback resets
pressed track to the first step

In some actions PLAY button acts as Yes/confirmation of the call to
action (e.g. overwriting not empty project).

STOP
: playback stop button:

Once we are in the menus, single press acts as an exit from the menu
or cancel of call to action without stopping the playback

Also acts as a PANIC BUTTON when pressed and held a few times in
case some MIDI devices have hanged notes

RECORD
: that button enables record or edits the notes in different
combinations:

When sequencer is not running, short RECORD button press starts the
step record input on the selected track (see TRACK D/1/2/3 buttons)

Long press enters the editor ( X0X for drums or step editor for melodic
tracks)

When sequencer is running, then short press enables live recording and
long hold enters the live editor, so you can preview all the changes on
the fly

Combination

→ RECORD enters the save Pattern/Project menu

Combination

→
RECORD
→
RECORD saves all the current project
settings as well as all unsaved tracks

Combination TEMPO+RECORD starts RECORD WAIT mode.

LAST STEP
: sets the amount of steps per track but in other menus acts as
alternative key (e.g. alternating project / pattern) etc.:

Combination LAST STEP + MUTE BUS
→
VALUE-/+ (or PAGE or
numeric keys P/0...Z/9 ) sets the amount of steps per separate drum or
melodic tracks. After choosing the track with TRACK D/1/2/3 buttons,
we adjust its pattern length

In melodic tracks editor that button acts as a flag for enabled slide on
the active step