MODULATION OUT JACK
FW V.2
It is possible to assign modulation or velocity of a certain track to modulation
output jack. If it is assigned to modulation of a certain track or drum track, it
automatically obtains the length of the steps on that or other drum track.
Modulation output jack settings are accessible in the menu via
TEMPO
→
F/MOD.OUT
combination: see the
MENU
section below for all the settings.
VELOCITY EDITOR
To access the
VELOCITY EDITOR
, switch to any of the
TRACK D/1/2/3
and long
press
RECORD
. Press
VELOCITY
(1/16)
button and you will get into the velocity
step editor for the current pattern with the display showing
V__1
:
meaning you
are editing velocity value on the selected track or selected drum trigger with 1...8
buttons. Navigating thru the steps with the
⯇
PAGE
⯈
buttons you select the step,
the note’s velocity on which you wish to adjust and then either with
VALUE-/+
buttons or lower row of
A...N
buttons you set the value from 0 to 127. Those 128
values correspond to 7-bit note’s velocity message sent thru the MIDI and USB-
MIDI outputs on certain note appearance.
Velocity value 0 means the note isn’t fired
X0X-STYLE EDITOR (FOR DRUM TRACKS)
For editing the drums patterns, is easier to use
X0X-STYLE
editing inspired by
Roland
®
TR-606/808/909 etc. machines. That X0X editor is a part of standard
editor and exists only for the drum track.
To enter the editor long press
RECORD
and then select
TRACK D
. In that mode
lower row of 14-piano keys together with
O/0
and
Z/9
side keys creates 16-step
grid. Press
P/1...Y/8
buttons to select the drum trigger – that selection activates
its steps on imaginary 16-step grid:
Summary of Contents for GROUND CONTROL
Page 1: ...GROUND CONTROL FIRMWARE V 2 10 ...
Page 5: ...BLACK PANEL DESIGN NEW SILVER PANEL DESIGN ...
Page 6: ...INTERFACE ...